I reached out to my contact at Curt and the display you are getting on your Curt TriFlex Trailer Brake Controller # C24VV you have is perfectly normal.
When you press the brake pedal in your truck the controller will read the power setting you have the controller set to. You can see this at the 3:20 minute mark of the included video when Ryan presses the brake pedal with no trailer connected. view full answer...
The cap should fit back on after installing the # e98852 on your 2020 Ram 1500 Classic. Not only should it fit, it should fit fairly easily. This is rare but it has happened to a few people. What I recommend, and what worked for them, is loosening the bolts and adjusting the order you torque them down. This may allow the hitch to seat differently which will let you get the cap back on.
The other thing you can try is working that top bolt in and out to see if you can get it to seat further... view full answer...
It sounds like there is an issue with the connection between your 2019 Ram 1500 Classing and your trailer causing the Curt Venturer # C74VV to not recognize a trailer is attached.
This is pretty easy to test and will require a circuit tester like # PTW2993. You will need to stick the probe of the circuit tester into the blue wire going into the back of your Curt Venturer # C74VV and see if you are getting the green bars to show on the controller when applying the override button.
If... view full answer...
According to Air Lift, spacers cannot be added to the # AL60818HD. In order to minimize any sag make sure you are pre-loading the air bags. Air should be added when the vehicle is unloaded so that they can properly expand within your coil springs. If you inflate the air bags with the vehicle loaded they will not be effective. view full answer...
Go To Results